|MACRO Bubble Blown Film Fiber Line, consisting of:|
|Machine||MACRO Bubble Blown Film Fiber Line, consisting of:|
|Description||1 - Macroplast TB6896 Extruder, 2" diameter, ~30:1 L/D, 30 hp 230v 14:1 gearbox, ME-200-30-30. Tew Type TAL-400NE Auto Loader with Microprocessor Control.
1 - Macro ME-18C-16-1-D66 Dual Lip Air Ring, 254-406mm die diameter, 1448 air ring diameter, 8 intake ports, 102mm hose diameter, 1.2 - 1.4 kg/hr per mm die diameter expected specific output.
1 - Master Control Panel.
NOTE: Spin tower with pull roll is NOT included as it was too difficult and expensive to remove from operation. Rigger who did the demo still has it and will sell separately.
Available with or without:
2 - DIING KUEN 500MML Draw Stands, Model TK-FY50, (5) rolls each ~760mm face x 250mm diameter with nips, Digital Conch Speed Readout.
1 - DIING KUEN 2 Stage Plate Heater, 750mm wide x 3000mm long (~30"W x 8?L).
1 - DIING KUEN Model ARE-600 Automatic Turret Winder, with Hitec Microprocessor.
1 - 24" 3 Station Payoff Stand, 3" diameter, Hydralign CorSaf Chucks with Montalvo brakes
2 - DIING KUEN 300MML Draw Stands, Model TK-FY30, (3) rolls each ~500mm face x 250mm diameter with nips, Digital Conch Speed Readout.
2 - DIING KUEN Model TK-500 2 Stage Plate Heaters, Gamma High Voltage Chargers for Each Stage (corona treating), 500mm wide x 3000mm long (~20"W x 8?L).
1 - DIING KUEN Fibrillator Nip Roll & Dancer Stand, ~400mm wide, with Speed Control Cabinet.
Last used to make staple fiber. Crimping and cutting equipment is available separately.
Appears in VG condition.|